SunTex 80 vs 90: which solar screen fabric should you buy?
Buy SunTex 80 where you want to keep daylight and the view, and SunTex 90 where low sun hits the glass and glare is the problem. Phifer's own specification sheet puts SunTex 80 at approximately 25% openness with about 75% UV blockage, letting through 36-39% of visible light, and SunTex 90 at approximately 10% openness and 90% UV blockage, letting through 18-20%. So the 90 passes about half the daylight of the 80. If the screen rolls up into a housing, look at SunTex 95, 97 or 99 instead: Phifer made those thinner and lighter specifically for exterior roller shades.
Key takeaways
- The "80" is a product name, not a measurement. Phifer's sheet gives SunTex 80 approximately 25% openness and approximately 75% UV blockage. Retail listings round it to "20% open" and "up to 80%".
- Visible light through the fabric: 36-39% for SunTex 80, 18-20% for SunTex 90, across all six colors in Phifer's table. Color changes heat reflection far more than it changes daylight.
- SunTex 90 is the heaviest of the family at 17.2 oz/yd², 27% heavier than SunTex 80 (13.5 oz/yd²). SunTex 95 sits between them at about 15.1-15.4 oz/yd².
- SunTex 80 and 90 are about 0.040 in (1 mm) thick. On a 70 mm tube, an 8 ft drop of SunTex 80 makes a roll about 3.5 in (90 mm) across before the bottom bar is counted.
- SunTex 95/97/99 come only in 126 in (3.2 m) rolls of 30 yd; SunTex 80 and 90 come in 36-120 in widths.
SunTex 80, 90 and 95/97/99 side by side
| Property | SunTex 80 | SunTex 90 | SunTex 95 / 97 / 99 |
|---|---|---|---|
| Openness factor | Approximately 25% | Approximately 10% | Approximately 5% / 3% / 1% |
| UV blockage | Approximately 75% | Approximately 90% | About 95% / 97% / 99% |
| Visible light transmitted | 36-39% | 18-20% | Not in the sources read |
| Weight | 13.5 oz/yd² (457.73 g/m²) | 17.2 oz/yd² (583.18 g/m²) | 15.1-15.4 oz/yd² (SunTex 95) |
| Thickness | 0.040 in (1.016 mm) | 0.039 in (0.991 mm) | "Thinner" than traditional SunTex |
| Breaking strength, warp / fill | 400 / 380 lb | 480 / 340 lb | Not in the sources read |
| Roll widths | 36, 48, 60, 72, 96 in; 120 in now listed | 36-96 in; 120 in in all colors except Grey | 126 in only, 30 yd rolls |
| Made for | Shading windows, doors and porches | Shading windows, doors and porches | Exterior roller shades |
SunTex 80 and 90 figures are from Phifer's SunTex 80/90 specification card (version V18B, hosted by the distributor Trivantage). The 120 in SunTex 80 width and the SunTex 95 weight are from Trivantage's current listings for SunTex 80 at 120 in and SunTex 95 at 126 in, which give 15.1 oz/yd² in the headline and 15.4 oz/yd² in the specification block. The 95/97/99 openness and UV figures are from a Phifer SunTex 95 dealer listing.
Is SunTex 80 20% open or 25% open?
Both numbers circulate, and they come from different documents. Trivantage's product page for SunTex 80 says "20% open weave" and that it "absorbs up to 80% of the sun's hot rays." Phifer's own specification card for the same fabric lists the openness factor as "Approximately 25%" and UV blockage as "Approximately 75%." For SunTex 90 the two agree: approximately 10% open, approximately 90% UV blocked.
Go with the specification card. It is the maker's technical sheet, it gives each figure as a measured property, and its other numbers hang together: 75% UV blocked plus 25% open area adds up to the sun that comes straight through the holes. Retail copy reads the product name as if it were a measurement, and "80" splits neatly into "80% blocked, 20% open." That neat split is why the 20% figure keeps getting repeated.
The gap matters at the bottom of the range. Efficient Window Coverings gives solar screens "Excellent UV protection (75-99%)" on its exterior solar screen page, and SunTex 80 sits at the 75% floor of that range, not comfortably inside it. If fading of floors and furniture is the reason you are buying a screen, SunTex 80 is the weakest choice in the family. How openness caps UV protection is explained in UPF and UV protection, and the general idea of open area in openness factor.
Daylight and view: the 90 halves the light
Phifer's card gives a visual transmittance for every color, and the spread is narrow. SunTex 80 passes 36% (Grey and Stucco) to 39% (Beige) of visible light. SunTex 90 passes 18% (Brown, Grey, Dark Bronze) to 20% (Stucco, Beige). Going from 80 to 90 roughly halves the daylight in the room behind the screen, whichever color you choose.
Both figures are higher than the open area. A SunTex 80 screen passes more than a third of the light through a weave that is a quarter holes, and SunTex 90 passes about twice its open area. So the coated yarns let some light through as well, and a room behind SunTex 90 will be less dark than "10% open" suggests. The card notes that "Dark colors provide maximum glare reduction and visibility," which matches the general rule on our openness factor page: choose the openness for the sun, then a dark color for the view.
Heat: both work outside the glass, color matters more than the number
Efficient Window Coverings puts exterior solar screens at a shading coefficient of 0.14-0.33 and the same screens mounted inside the glass at 0.50-0.70. Its conversion is SHGC = 0.87 x SC, so outside the glass a solar screen leaves the window passing roughly 12-29% of the sun's heat. It adds that "the openness factor can change the shading performance by between 5 and 25%; color can change the shading performance by as little as 5% or as much as 100%."
So the choice between 80 and 90 is a smaller heat decision than where the screen is mounted, or whether it is light or dark. A light SunTex 80 outside the glass will beat a SunTex 90 of any color hung inside. The full window-film comparison, with a worked heat-gain example, is in solar screens vs window tint, and the bug-versus-sun trade-off in solar screens vs insect screens.
Roll-down and motorized screens: why SunTex 95 exists
SunTex 80 and 90 were developed, in Phifer's words, "originally for use in outdoor furniture" and are described as "Ideal for use as a shading fabric on windows, doors and porches." When Phifer launched SunTex 95, trade news on textiles.org described it as "designed specifically for exterior roller shades" and "thinner and lighter weight in a full basketweave." Trivantage's 2026 SunTex buying guide goes further: it says the "thicker mesh" of SunTex 80 and 90 is "not recommended for roller shade or motorized installations where flexibility is key."
Thickness is what a roller feels. Every turn of fabric adds two thicknesses to the roll's diameter, so the diameter grows roughly with the square root of the fabric's length times its thickness. Our motorized screen housing sizes page shows how the roll, not the tube, decides the box once the drop gets tall.
SunTex 80 at 0.040 in: square root of (7.6 + 4 x 0.040 x 96 / 3.14) = about 3.5 in (90 mm).
At a 10 ft (120 in) drop: about 3.7 in (94 mm). At 16 ft (192 in): about 4.2 in (106 mm).
Fabric weight for the 80 sq ft (8.9 yd²) panel: SunTex 80 about 7.5 lb, SunTex 95 about 8.4-8.6 lb, SunTex 90 about 9.6 lb.
The KE CS4 cassette that pairs a 70 mm tube with this size of screen is a 4 in (102 mm) box, so a 3.5 in roll of fabric alone, before the zipper edges and the bottom bar, leaves little room.
The formula ignores the welded zipper strips of a zip-track screen, which add thickness at the roll ends. Treat the result as a floor, not a fit. The weight figures matter for the motor: SunTex 90 adds about 2 lb over SunTex 80 on this panel. How torque is sized is covered in motorized patio screens.
Roll widths decide whether you get a seam
On a roll-down screen the fabric runs across the roller, so the roll width caps the width of a seamless panel unless the fabric is turned sideways (railroaded), which moves the limit to the drop instead. Phifer's card lists SunTex 80 at 36, 48, 60, 72 and 96 in, and Trivantage now sells it at 120 in in 30 yd rolls. SunTex 90 adds a 120 in width "in all colors except Grey." SunTex 95/97/99 come only at 126 in, sold as 126 in x 30 yd rolls. For fixed window frames, the narrow widths of 80 and 90 waste less fabric; for a 10 ft porch opening, only the 120 and 126 in rolls cover it in one piece.
Strength, care and warranty
All three fabrics are vinyl-coated polyester with Microban additives and a 10-year exterior warranty in the sources read. SunTex 90 is stronger along the length (480 lb warp against 400 lb for SunTex 80) and slightly weaker across it (340 lb fill against 380). SunTex 90 also carries the Melanoma International Foundation Seal of Approval, which Phifer's card does not claim for SunTex 80. None of the SunTex documents read names NFPA 701, which matters on commercial jobs; the fabrics that do are compared in NFPA 701 solar screen fabrics. Cleaning rules for SunTex, including the bleach limit, are in how to clean retractable and solar screens.
When this comparison stops applying
- Other makers' "80%" and "90%" fabrics. The figures above are Phifer's for SunTex. Another brand's 90% mesh is not measured to the same name, so compare openness factor and visual transmittance from its own sheet, not the number on the label. Twitchell's Textilene is set against SunTex figure by figure in Textilene vs SunTex.
- SheerWeave. Phifer's 1-10% open SheerWeave styles are not higher SunTex grades. They are thinner fiberglass shade fabrics with a 5-year exterior warranty, compared figure by figure in SheerWeave vs SunTex.
- Interior mounting. Inside the glass, every solar screen falls to a shading coefficient of 0.50-0.70. The 80 vs 90 choice changes glare there, not much heat.
- Night privacy. No openness in this family gives privacy after dark with the lights on inside. SunTex 97 and 99 give the most daytime privacy, at the cost of view.
- Replacing fabric in an existing roller. Match what the maker specified. Swapping SunTex 95 for SunTex 80 or 90 in a small housing risks a roll that rubs or will not fully retract. The re-screening method is in how to rescreen a retractable screen.
- Older stock and sheets. The 80/90 card read here is version V18B. Widths have since grown (SunTex 80 at 120 in), so check current sheets for color and width availability before you order.
Bottom line
Choose SunTex 80 for fixed exterior screens on east and south windows where you want to keep about 37% of the daylight, and accept that it blocks about 75% of UV, not 80%. Choose SunTex 90 for west glass, glare and fading problems: about 19% of the daylight and 90% of UV. For anything that rolls into a housing, start from SunTex 95 (or 97/99 for daytime privacy), which Phifer designed for exterior roller shades, and in every case use the fabric the screen maker rated the housing for.
Frequently asked questions
Does SunTex 80 block 80% of the heat?
Not as a measured figure. Phifer's sheet lists approximately 75% UV blockage and approximately 25% openness for SunTex 80. Heat blocked depends on color and mounting: outside the glass, solar screens in general bring a window to a shading coefficient of 0.14-0.33.
Can you see out through SunTex 90?
Yes in daylight, with less light and contrast than SunTex 80. Phifer's table gives SunTex 90 a visual transmittance of 18-20%, against 36-39% for SunTex 80. Dark colors give the clearest view.
Does SunTex keep bugs out?
The weave is far tighter than insect mesh, so it stops ordinary insects where the frame or track seals the edges. Gaps at the edges matter more than the fabric; see screen mesh types.
Which SunTex is best for a motorized zip screen?
The one the screen maker lists for that housing. Phifer designed SunTex 95 for exterior roller shades, and its distributor Trivantage does not recommend SunTex 80 or 90 for roller or motorized installations.
Sources and standards consulted
- Energy Efficient Window Attachments (U.S. Department of Energy, Energy Saver)
- EN 13561:2015, External blinds and awnings (CEN)
- ASCE 7, Minimum Design Loads for Buildings (wind and snow loads) (American Society of Civil Engineers)
See how we research for our sourcing and verification process.