Is solar screen fabric fire rated to NFPA 701?
Some solar screen fabrics are, and some are not, so the answer belongs to the fabric, not the category. Twitchell's Textilene sheets name NFPA 701-2015 Test Method 1 (small scale) and Test Method 2 (large scale), and Trivantage lists Phifer's exterior-rated SheerWeave 2390 and 2410 to NFPA 701-2004 TM1 and TM2. Phifer's SunTex 80/90 card names a Class A rating, California TB 117-2013 and CAN/ULC-S109, but not NFPA 701, and no readable SunTex document we found does. If a fire marshal or a spec asks for NFPA 701, pick a fabric whose certificate names the test method and edition, and get that certificate before the screen is ordered.
Key takeaways
- NFPA 701 is listed per fabric. Of the 12 fabric lines in the table below, 11 name it. SunTex 80 and 90 do not.
- The certificates describe TM1 as "Small Scale" and TM2 as "Large Scale." Seven lines name both, two name TM1 only, and two say "NFPA 701" with no method.
- Class A is not NFPA 701: Phifer lists them as separate standards. Editions run from 2004 to 2023, and listings can quote an older edition than the current certificate.
NFPA 701 status, fabric by fabric
| Fabric | Use stated | NFPA 701 method and edition | ASTM E84 / NFPA 101 | California Title 19 | Document read |
|---|---|---|---|---|---|
| Textilene 80 (Twitchell) | Exterior | 2015 TM1 and TM2 in the sheet's fire paragraph; the sheet's table row says "CS191-53 & CA117E" | NFPA 101 Class A | Small scale | Twitchell sheet (Feb 2020), Trivantage listing |
| Textilene 90 (Twitchell) | Exterior | 2015 TM1 and TM2; table row "CA Title 19 & NFPA 701" | NFPA 101 Class A | Small scale | Twitchell sheet, Trivantage listing |
| Textilene Nano 95 | Exterior | 2015 TM1 and TM2 | NFPA 101 Class A | Small scale | Twitchell sheet |
| Textilene 95 (17.3 oz/yd²) | Exterior | "NFPA 701," no method or edition | Not stated | Yes (State Fire Marshal) | Trivantage listing |
| SunTex 80 and 90 (Phifer) | Exterior | Not listed | NFPA 101 and IBC 803.1.1 Class A | Not listed | Phifer card V18B, Trivantage listing |
| SheerWeave 2390 (5%) and 2410 (3%) | Interior and exterior | 2004 TM1 and TM2 | E84 Class 1, NFPA 101 Class A | Small scale | Trivantage listings |
| SheerWeave 2500, 2701, 2703, 2705, 2710 | 2703: interior, also exterior roller shades | 2004 TM1 and TM2 | Class A, flame spread 15, smoke 80 | Small scale | Phifer certificate, July 2009 |
| Rollease Acmeda screen fabrics (9 styles) | Window treatments; one paragraph on exterior use | "NFPA 701," no method or edition | E84 listed for 3000 Net only | Listed for 7 of 9 | Sweets listing |
| SheerWeave 4901 and 4903 | Not checked | 2010 TM1 and TM2 | Class A: 4901 flame 10, smoke 250; 4903 flame 15, smoke 200 | Section 1237.1, registration F-03601 | Phifer certificate, May 2017 |
| SheerWeave 4001 | Not checked | 2019 TM1 and TM2 (flat) | Class A (E84-21a), flame 15, smoke 300 | Small scale | Phifer certificate, expires 12/20/2027 |
| SheerWeave Infinity2 5% | Interior | 2019 TM1 only | Class A (E84-10b), flame 10, smoke 250 | Not listed | Phifer certificate, expires 5/15/2028 |
| SheerWeave 7100 blackout | Interior | 2023 TM1 only | Class A, flame 25, smoke 110 | Section 1237 small scale | Phifer certificate, expires 12/03/2029 |
Textilene entries are from Twitchell's Textilene 80 and 90 specification sheet (headed "Twitchell Exterior Window Shade Solar Screen"), the Textilene Nano 95 sheet, and Trivantage's listings for Textilene 80, Textilene 90 (15.8 oz/sq yd, 96 in, "California State Fire Marshal Title 19, NFPA 701") and Textilene 95. SunTex entries are from Phifer's SunTex 80/90 card and Trivantage's SunTex 90 listing. The exterior SheerWeave styles are from Trivantage's SheerWeave 2390 and SheerWeave 2410 listings. The Phifer certificates are hosted by Draper: SheerWeave 2500 and 2700, 4901 and 4903, 4001, Infinity2 5% and 7100. Rollease Acmeda's styles are from its solar screen fabrics listing on Sweets. "Use stated" is what the listing or sheet says.
Does SunTex carry NFPA 701?
Not in any document we could read. The "Fire Classification" line on Phifer's SunTex 80/90 card lists California Technical Bulletin 117-2013 Section 1, CAN/ULC-S 109-03 (large scale), IBC Section 803.1.1 (Class A) and NFPA 101 (Class A). Trivantage's SunTex 90 listing gives TB 117 Section E and Class A, and does not mention NFPA 701. Phifer's SunTex 95/97/99 page did not load for us, and none of the Phifer certificates Draper hosts is for SunTex.
That does not prove SunTex would fail NFPA 701. It means an inspector who asks for an NFPA 701 certificate will not get one from the card, so ask Phifer before specifying SunTex on a job that needs it. The closest swap on paper is Textilene 90, a vinyl-coated polyester exterior mesh in the same tier, compared figure by figure in Textilene vs SunTex. Changing grade inside the range, covered in SunTex 80 vs 90 vs 95, does not change the fire listing.
Why "Class A" gets mistaken for NFPA 701
Because both appear under the same heading, while Phifer's certificates number them as separate standards. The SheerWeave 2500/2700 certificate lists NFPA 101 "Life Safety Code" Class A, "Tested in accordance to ASTM E84," with a flame spread index of 15 and a smoke developed value of 80, as item 1, and NFPA 701-2004 Test Methods 1 and 2 as items 3 and 4. The Infinity2 certificate gives the E84 title: "Surface Burning Characteristics of Building Materials." A Class A line is an E84 result, not an NFPA 701 result, and SunTex's card has the first without the second.
The other source is trade copy. A 2010 news item on textiles.org is headlined "Solar screen products are NFPA 701 certified," but its text covers one maker's lines: Alkenz USA's SunShadow products "are Greenguard, NFPA 701, and Oeko-Tex Standard 100 certified."
TM1 or TM2: what the certificates say
NFPA 701 itself is sold by NFPA and we have not read it, so this section goes only as far as the certificates do. They describe Test Method 1 as "Small Scale" and Test Method 2 as "Large Scale." The SheerWeave 2500/2700 certificate adds that its TM2 test was a "Single Flat Specimen," and the SheerWeave 4001 certificate reads "TM#2, Flat." None of the documents says which method a given fabric or use requires, or what either test measures.
The table shows where each method is named. If a spec names a method, a listing that just says "NFPA 701" does not answer it, and the two interior styles with TM1 only (Infinity2 and 7100) are not listed to TM2 on the documents read. Ask for the certificate that names the method and edition.
Editions and expiry dates: listings lag the certificates
The same fabric can be quoted to different editions in different places. Trivantage's listings give SheerWeave 7100 as "NFPA 701-2004 TM#1" and Infinity2 5% as "NFPA 701-2004 TM#1 (small scale)," while Phifer's current certificates for those styles cite the 2023 edition and the 2019 edition. Trivantage also lists the 7100 item we read as "NO LONGER AVAILABLE." The newer Phifer certificates print expiry dates (4001 on 12/20/2027, Infinity2 on 5/15/2028, 7100 on 12/03/2029), and each says "Testing was performed by a 3rd party certified laboratory on samples representing products listed." The 2009 and 2017 certificates print none.
Listings also print "IBC Section 903.1" for the Class A rating (SunTex 90, SheerWeave 2390, 2410, 2703), where Phifer's certificates and the SunTex card say 803.1.1. Hand over the maker's certificate, not the listing.
The Textilene 80 discrepancy
Twitchell's February 2020 sheet covers Textilene 80 and 90 together. Its fire paragraph says they pass Title 19 (small scale), "NFPA701-2015 TM#1 (small scale)," NFPA 101 Class A, "NFPA 701 TM #2 (large scale)" and CAN/ULC-S 109-03, and Trivantage's Textilene 80 listing repeats that sentence. But in the sheet's "Flammability Rating" row, Textilene 80 reads "CS191-53 & CA117E" while Textilene 90 reads "CA Title 19 & NFPA 701," as does Nano 95 on its own sheet.
The sheet does not explain the difference. For Textilene 90 and Nano 95 both parts agree; for Textilene 80 they do not, so get an NFPA 701 certificate naming Textilene 80 before using it where the test is required. Its 23% openness is a separate choice, explained in screen mesh openness factor.
Exterior screen fabric or interior shade fabric?
Many flame certificates that turn up online are for interior roller-shade fabrics. Of the five Phifer certificates read, none is for SunTex, and two are for styles Trivantage lists as interior: 7100 is described as an interior light-blocking fabric, and Infinity2 is used "in screens, roll-up shades, and panel tracks" with a 5-year interior warranty. We did not find a use statement for 4001, 4901 or 4903. A certificate for one of these does not cover a patio screen.
For outside, Textilene 80, 90, Nano 95 and 95 are sold as exterior solar screen fabrics. SheerWeave 2390 (about 5% open, 11.8 oz/yd², 98 in) and 2410 (3% open, 14.1 oz/yd², 126 in) are listed for "interior and exterior applications" with a 5-year exterior warranty, and SheerWeave 2703 "can also be used for exterior roller shades." Trivantage's SheerWeave category page is headed "SheerWeave Interior Solar Shading Fabric," so check the style's own listing.
For a drop or zip screen, the screen maker sizes the motor and housing for its own fabrics, as motorized patio screens explains, and zip edges are welded to the fabric (see zip-track screens). Ask which of the maker's approved fabrics carries the certificate you need rather than supplying your own.
What to ask for on a commercial job
Restaurants and other commercial patios are where the question comes up. The wider permit and fabric picture for those projects is in restaurant and commercial retractable awnings. For the screen fabric itself:
- The maker's certificate, not a listing. It should name the style number, the NFPA 701 edition and the method (TM1, TM2 or both).
- A current date. On the newer Phifer certificates, check the expiry line.
- The California registration, if you are in California. Phifer's 4901/4903 certificate gives "California Registration F-03601" under Title 19 Section 1237.1; the Textilene sheets say "Title 19 (small scale)."
- The E84 numbers, if the spec has a smoke limit. Flame spread and smoke developed values are on the Phifer certificates; the Textilene and SunTex sheets give only the Class A rating.
- The same style on replacement. When a panel is re-screened, the new fabric needs its own certificate. The method is in how to rescreen a retractable screen.
When this table stops applying
- Which test your project needs. This page says which fabrics carry which listing. It does not say which code section applies to your project; we have not read the code text. Your building or fire official decides that.
- Treated or coated changes. The listings apply to the fabric as made. None of the documents read covers a fabric after dyeing, coating, printing or heavy cleaning. Care rules per maker are in how to clean retractable and solar screens.
- Colors and openness. The SheerWeave 4901/4903 certificate covers "All colors and weaves"; most others name the style only. Ask whether the certificate covers the color you are ordering.
- Insect mesh. None of these documents covers fiberglass or aluminum insect screening; see solar screens vs insect screens for that choice.
- Fabrics we could not read. Phifer's SunTex 95/97/99 page and Phantom Screens' restaurant case study were not readable, so they are not in this table.
Bottom line
Solar screen fabric is not NFPA 701 rated as a category. On the documents read, Textilene 90 and Nano 95 name NFPA 701-2015 TM1 and TM2 and California Title 19, and Trivantage lists SheerWeave 2390 and 2410, rated for interior and exterior use, to NFPA 701-2004 TM1 and TM2. Textilene 80's own sheet disagrees with itself, so get a certificate first. SunTex 80 and 90 carry Class A (NFPA 101 and IBC 803.1.1) and TB 117-2013, and no readable SunTex document names NFPA 701. Whatever the fabric, the document that counts is the maker's current certificate naming the style, the edition and the method.
Frequently asked questions
Is Textilene fire retardant?
Twitchell calls it "flame resistant" and lists NFPA 701-2015 TM1 and TM2 and Title 19. Textilene 90 and Nano 95 match in every part of their sheets; Textilene 80 does not, so ask for its certificate.
What is the difference between NFPA 701 TM1 and TM2?
On the certificates read, TM1 is the "Small Scale" test and TM2 the "Large Scale" test, done on a "Single Flat Specimen" in the SheerWeave 2500/2700 certificate. The documents do not say which one a project needs; the spec or the inspector does.
Sources and standards consulted
- AATCC TM183, Transmittance or Blocking of Erythemally Weighted UV Radiation through Fabrics (AATCC)
- AS/NZS 4399, Sun protective clothing: evaluation and classification (UPF) (Standards Australia)
- ASTM D6603, Standard Guide for Labeling of UV-Protective Textiles (ASTM International)
- EN 14501 and EN 13363, Solar protection devices: thermal and visual comfort, solar transmittance (CEN)
- Awning fabric technical data sheets from major acrylic and polyester mills (manufacturer documentation)
See how we research for our sourcing and verification process.