How Loud Are Motorized Screens?

The exterior screen motors that publish a noise figure with a stated method are rated at 50 to 55 dB(A) of sound power: 50 to 52 dB(A) for Somfy's Sunea Screen 40 io and 55 dBA for Somfy's LT50 RS485. By our calculation that is about 42 to 47 dB at 1 m (3 ft) from the head box and 32 to 37 dB at 3 m (10 ft), for the 30 to 50 seconds a 9 ft drop takes. The quieter numbers in circulation, 33, 42 or "under 44" dB, are a different measurement, an interior shade motor, or both, and a listing that does not say what it measured cannot be ranked at all.

Key takeaways

  • Sound power is what the motor emits; sound pressure is what reaches your ear. Against a wall, pressure at 1 m is about 8 dB below power, and falls 6 dB per doubling of distance.
  • Measured the same way (ISO 3741), Somfy's interior Sonesse 50 RTS motors are 41 to 48 dB(A), its Sunea Screen 40 io 50 to 52, its LT50 RS485 55.
  • Becker's zip screen motor states only "≤ 70" dB(A), and Elero's zip motor page gives no figure. Gaposa's "42 Db" and Nice's "33 dBA" listings name no method.
  • Torque and speed move the figure 2 to 4 dB within a sheet. Distance and the fit of the tube accessories move what you hear by more.

Published noise figures for screen and shade motors

Sources: Somfy's Sunea Screen 40 io technical data sheet (15/09/2016), Sonesse 50 RTS technical data sheet (06/02/15), LT50 RS485 sheet (10/2017) and Sonesse range folder; Becker's S18 assembly and operating instructions (2025); Elero's SunTop/Z M RH page and 2026 catalogue; Hopkins' Gaposa XS50 listing; and dieffematic's Nice Era Inn Smart M DC listing.

Screen and shade motor noise figures as published, with what each figure measures
MotorUse statedTorque / speedPublished figureWhat the figure is
Somfy Sonesse 50 RTS 6/17"Interior applications"6 Nm, 17 rpm41 dB(A)Sound power, ISO 3741, upper 95% confidence limit over 5 samples, at nominal torque
Somfy Sonesse 50 RTS 6/28, 10/28Interior6 and 10 Nm, 28 rpm45 dB(A)Same as above
Somfy Sonesse 50 RTS 3/28Interior3 Nm, 28 rpm46 dB(A)Same as above
Somfy Sonesse 50 RTS 15/17Interior15 Nm, 17 rpm48 dB(A)Same as above
Somfy Sunea Screen 40 io 4/16, 3/30Screen, valance or lateral arm awning4 Nm, 16 rpm; 3 Nm, 30 rpm50 dB(A)Sound power, ISO 3741, at nominal torque, 20 to 35°C, upper 95% confidence limit over 5 samples
Somfy Sunea Screen 40 io 9/16, 13/10Same9 Nm, 16 rpm; 13 Nm, 10 rpm52 dB(A)Same as above
Somfy LT50 RS485 515 and 535IP 44, "interior & exterior use"15 Nm, 38 rpm; 35 Nm, 20 rpm55 dBASound power, ISO 3741, at nominal torque "without end product"
Somfy Sonesse 30, 40, 50 (range folder)Indoor window coverings2 to 12 Nm< 44, < 45, < 44 or < 50 dB(A) by modelSound pressure at 1 m from the finished blind, at nominal torque
Gaposa XS50 (dealer listing)"screens & blinds"7 Nm, 18 rpm"42 Db"Not stated
Nice Era Inn Smart M DC (dealer listing)Interior range (per Nice)6 Nm, 32 rpm, 24 V DC33 dBANot stated
Becker S18"solely" vertical ZIP systems5 to 40 Nm, 16 to 30 rpm≤ 70 dB(A)Emission sound pressure level, given as a ceiling only
Elero SunTop/Z M RHRound head for ZIP systems4 to 30 NmNonePage lists a "noiseless soft brake up to 20 Nm", no dB figure

Only the first seven rows share a method and can be put in order. The folder row measures a different quantity, and the last four cannot be ranked against anything.

Sound power vs sound pressure: why 33 dB and 50 dB can be the same motor

Two answers circulate: that screen motors are near silent at 33 to 44 dB, and that they run at 50 dB or more. Both quote real sheets that measure different things.

Sound power is the output of the source, wherever you stand; Somfy gives it "in dB(A) ref 1pW" to ISO 3741. Sound pressure is what a meter reads at one spot, so it means nothing without a distance. Somfy's Sonesse folder gives one: "Sound pressure at a distance of 1 m from the carrier product at nominal torque."

For a source on a reflecting surface, as a head box sits on a wall or beam, acoustical.co.uk gives Lp = Lw - 20 x log10(r) - 8 dB, where Lw is the sound power, Lp the sound pressure and r the distance in meters. So at 1 m the pressure is 8 dB below the power, and every doubling of distance takes off another 6 dB.

Published sound power to the sound pressure you hear (Retract Wise calculation: hemispherical spreading, open air, no other reflections)
Sound power, dB(A)Example motorAt 1 m (3.3 ft)At 2 m (6.6 ft)At 3 m (9.8 ft)
41Sonesse 50 RTS 6/1733 dB27 dB23 dB
50Sunea Screen 40 io 4/1642 dB36 dB32 dB
52Sunea Screen 40 io 13/1044 dB38 dB34 dB
55LT50 RS48547 dB41 dB37 dB

Apply it to the listings with no method. If Gaposa's "42 Db" is sound pressure at 1 m, its sound power is about 50 dB(A), the same as the quietest Sunea Screen 40 io. If it is sound power, the motor is 8 dB quieter than that Sunea. Nice's 33 dBA is either the equal of the quietest Sonesse 50 RTS or 8 dB below it. The printed number cannot tell you which.

Retract Wise analysis: The 8 dB gap is the common trap. A 42 dB sound pressure figure looks quieter than a 50 dB(A) sound power figure, but the two describe motors of about the same loudness. Behind the rule is Lp = Lw - 10 x log10(A), with A the area the sound spreads over. Put the head box in a corner or a ceiling pocket (pocket sizes are in motorized screen housing sizes) and that area halves, so add about 3 dB to every figure in the table.

Exterior screen motors are not the quiet interior lines

Measured the same way, Somfy's own sheets separate the ranges. Sonesse 50 RTS, limited by its sheet to "Interior applications Use", runs 41 to 48 dB(A). Sunea Screen 40 io, made for a "screen / Valance or Lateral Arms Awning", runs 50 to 52. The LT50 RS485, IP 44 for "interior & exterior use", is 55. The quietest exterior motor in these sheets is 9 dB above the quietest Sonesse.

The low figures mostly come from indoor products. Somfy's folder sells Sonesse as "the range of silent motors" for "indoor window coverings", and Nice launched Era Inn in 2017 for "persianas interiores y pantallas de proyección" (interior blinds and projection screens), according to Interempresas. The two zip screen motors we read say less: Becker's S18 states "≤ 70" dB(A), which puts it under 70 and says nothing about how far under, and Elero's SunTop/Z page gives no figure. For an exterior zip screen, plan on the Sunea range unless your motor's maker publishes a figure with its method. Which Somfy motors suit which products is in our Somfy motors guide.

Torque and speed matter less than buyers expect. In the Sunea sheet, more than tripling the torque (4 to 13 Nm) adds 2 dB, and the 30 rpm motor matches the 16 rpm one. The Sonesse 50 RTS sheet does show speed: the same 6 Nm motor is 41 dB(A) at 17 rpm and 45 at 28 rpm. Size the motor for the screen, as worked through in motorized patio screens, not for a decibel or two.

What the published figure leaves out

Each stated-method figure was taken with the motor running at nominal torque, and the LT50 RS485 figure "without end product", with no screen attached. A finished screen adds:

  • The fit of the tube accessories. Somfy's LT50 RS485 sheet says operational noise "is reduced when motor, tube, and mechanical accessories are properly adapted", that free play "must be minimized", and that its drive stop screw is "recommended to prevent noise". The Sonesse sheet adds "especially the crowns and the wheels", and Somfy's soft clip wheels are "not recommended" on one sheet and "forbidden" on the other.
  • The brake at each stop. The figures cover running, not stopping. Elero's 2026 catalogue sells its soft brake as stopping "without any disturbing clacking noises", which tells you a standard brake can clack. How the spring brake works is in tubular motor internals.
  • The zip edge in its channel. The plastic liner is often what makes a zip screen quiet or noisy; see zip track, keder and zipper edges. A screen that has grown noisier usually needs the liner cleaned, as described in screen tracks and guide rails, not a new motor.

The noise is also short: about 30 to 50 seconds for a 9 ft (2.7 m) drop.

How to get a quiet motorized screen

  • Ask for the figure and its method in writing: sound power or sound pressure, the distance, the standard. A bare "42 dB" is not an answer. To compare a pressure figure at 1 m with a Somfy sheet, add 8 dB.
  • Use distance. A seat 3 m (10 ft) from the head box hears about 10 dB less than one at 1 m, more than any motor choice in the table changes.
  • Ask about the accessories: crown and drive wheel matched to the tube, a drive stop screw, no soft clip wheels, a soft brake where offered. A level head box on solid framing, as set out in installing motorized patio screens, keeps the tube running true.

Where these numbers stop applying

  • The conversion is an estimate. It assumes open air and one reflecting surface. Ceilings, side walls and glass change the result, and indoors behind a closed window you hear less.
  • The sheets are dated 2015 to 2017. Ask for the sheet for the exact motor you are quoted.
  • Battery and solar motors. None of these sheets covers them; their torque limits are in battery vs hardwired motorized screen.
  • These are motor figures. No sheet we read measures a complete installed screen.

Bottom line

An exterior screen motor with a stated-method figure is 50 to 55 dB(A) of sound power, heard as roughly 42 to 47 dB at 3 ft and 32 to 37 dB at 10 ft while it runs. The 33 to 44 dB figures are sound pressure, interior shade motors or listings without a method. Ask which before comparing, and put your effort into distance and a well-fitted tube.

Frequently asked questions

Is a zip screen louder than a cable-guided screen?

No sheet we read measures either one complete. A dirty zip liner adds noise; a cable-guided screen can flap in wind. The two are compared in zip screen vs cable-guided screen.

Why does my screen motor click when it stops?

That is the spring brake engaging at the limit, and one soft click at each end is normal. Grinding, chattering or a stop short of the usual position is not; see how to reset the limits on a motorized screen.

Sources and standards consulted

  • EN 13561:2015, External blinds and awnings (covers vertical external screens and wind classes) (CEN)
  • Screen mesh specification sheets (fiberglass, polyester and PVC-coated meshes) (manufacturer documentation)
  • Energy Efficient Window Attachments (U.S. Department of Energy, Energy Saver)
  • Attachments Energy Rating Council (AERC) rating program (AERC)

See how we research for our sourcing and verification process.