Pleated vs roll-up retractable screen door: which should you get?

Get a roll-up screen for a standard single door up to 60 in wide where you want the screen to put itself away; get a pleated screen where the screen must stay where you leave it, the sill has to stay flat underfoot, or one panel has to cross more than 60 in. The difference is the spring. A roll-up winds its mesh onto a sprung roller that always pulls the screen home. A pleated screen has no spring: tensioned cords guide an accordion of mesh, and Windhager's pleated door simply "stays in any position." That one fact decides most of the rest: who can use it, what it does in a gust, and what wears out.

Key takeaways

  • Widest single roll-up in the maker sheets we read: 60 in (Genius Milano 100), or 48 in at 100 in tall from Phantom. A single pleated panel goes to 177 in (14 ft 9 in) on Marvin's Elevate bi-fold screen.
  • Pleated bottom tracks are the flattest published: 3 mm on Seiki's Plus Door, 4 mm on Streme's reveal-fit kit, both stuck to the floor with adhesive. They need a flat, level sill to work.
  • Parked, a pleated screen takes more of the opening: Streme's stack is 93 mm (3.7 in) wide on a 700 mm screen and 155 mm (6.1 in) on a 3,000 mm one. Phantom's roll-up door housing is 1-7/8 in (48 mm) wide.
  • Neither type carries a wind rating for door screens. Wide pleated screens need extra hardware (Streme adds windproof clips above 1,300 mm), and Phantom's roll-up magnet latch is designed to let go on impact.

Pleated vs roll-up at a glance

Pleated vs roll-up retractable screen doors (figures from the maker documents linked in the sections below)
QuestionRoll-up (spring)Pleated (cord)
What moves itSprung roller in a housing; speed reducer on better modelsHand only; tensioned cords guide the pleats
Let go halfwayReturns to the housingStays where it is
Widest single screen60 in (Genius Milano 100); Phantom 48 in at 100 in tall, 36 in at 120 in177 in (Marvin Elevate); some kits stop at 110 cm (43 in)
Bottom trackA track the handle bar runs in; threshold adapters sold to blend it in3-4 mm flat guide, glued to the sill
Minimum mounting depth3/4 in (Andersen LuminAire, surface mount)1-1/4 in recessed (Genius ZigZag1); 26 mm (Windhager PLUS)
Width taken when parkedHousing: 1-7/8 in (Phantom door screen)Pleat stack: 3.7-6.1 in, growing with screen width (Streme)
Mesh choices publishedFiberglass, high-visibility, TuffScreen, no-see-um (Genius); insect or solar (Phantom)Pleated polyester; no pet or solar option in the pleated sheets we read
What wearsSpring and speed reducerCords and their tension

How each one moves, and why it matters

On a roll-up, the mesh is wound onto a tube in a vertical housing on one jamb. Pulling the handle bar across winds up a spring; letting go lets the spring wind the mesh back in. Genius sells the Milano 100 on its "patented speed-reducer for slow, controlled retraction." How the spring, brake and latch interact is in how retractable screens retract, and how tension is set in retractable screen spring tension.

A pleated screen is folded mesh between a top and bottom guide. Cords run through the pleats from one end to the other and guide them as the screen opens and closes. The Genius ZigZag instructions are blunt about them: adjust tension "only if needed," always in equal amounts at both tensioners, and "never make the cords tight," because "too much tension will cause the screen to operate poorly and can damage the cords." Nothing stores energy, so the screen sits wherever it is pushed. Windhager's pleated door "stays in any position," and Seiki's Plus Door uses "the unique wire tension system" to "hold any position."

So a pleated screen can be left part-closed and has no spring for a child or a weak grip to fight, while a roll-up that is let go puts itself away, which matters on a door nobody remembers to close.

Width: where a single roll-up runs out

Every single roll-up screen in the maker documents we read stops at 60 in. Phantom's 2024 catalogue gives its door screen a maximum of 48 in wide up to 100 in tall, or 36 in wide up to 120 in, and a double unit 96 in or 72 in. The Genius Milano 100 reaches 60 x 100 in, but only 50 in wide with no-see-um mesh. The full chart, including how width falls as height rises, is in retractable screen door sizes.

Pleated screens are not automatically wide. Windhager's PLUS pleated door covers 60 to 110 cm (24 to 43 in) wide and 180 to 220 cm (71 to 87 in) tall, and Seiki's Plus Door tops out at 1,500 x 2,520 mm (59 x 99 in). Marvin's Elevate bi-fold door screen is a "Retractable Pleated Screen" with a single screen to 177 in (4,496 mm) and a double to 315 in (8,001 mm), both up to 118 in (2,997 mm) tall. Genius's ZigZag Two meets in the middle from 72 to 276 in wide, and the Sheer Classic 3-panel covers 60 to 240 in at heights of 75 to 125 in.

Pleated-screen patent US8196638B2 explains the old limit: on earlier designs "the span width which can be covered by the screen member is limited to the height of the screen opening."

So the width rule is: up to 60 in, either type works and the other sections decide. From 61 to about 96 in, it is two roll-ups meeting in the middle or one pleated panel. Past 96 in, a roll-up means an oversized system (Phantom's goes to 180 in single); pleated systems reach 177 in single and 315 in double.

The sill: pleated tracks are the flattest, and the fussiest

Seiki: "The lower bottom rail height is 3 mm," a "flat designed barrier-free type." Streme's reveal-fit kit uses a "4mm" bottom track, and its measuring guide gives 40 mm for the face-fitted version. Genius lists the Sheer Classic as "ADA Compliant."

The price of a 3-4 mm guide is that the sill does the work. The Genius ZigZag manual says the area the bottom guide rests on must be "flat, level and clean," and the ZigZag1 instructions distributed by JELD-WEN add that if it is not, you must "create a flat, smooth, and level surface" before the guide goes down on its adhesive.

A roll-up's bar runs in a bottom track too, and on uneven sills makers sell adapters rather than ask for a flat floor: Genius offers "Threshold Transitions" and "Sloped Sill Wedge Shims" for the Milano, and Phantom lists "various threshold adaptors" and a recessed bottom track for its oversized screen. Measuring the sill before choosing is covered in how to measure for retractable screens.

Mounting depth and the parked stack

A pleated screen usually wants a deeper reveal. The ZigZag1 "must be inset (recess) mounted at a depth of at least 1-1/4" on the interior of the opening," and Windhager's PLUS needs 26 mm (about 1 in). Andersen's LuminAire measurement guide asks for "3/4" flat surface on exterior trim face and 3/4" minimum depth" for its roll-up, mounted on the face of the trim.

The figure nobody puts on the box is how much of the opening the screen occupies once it is put away. A roll-up's housing has a fixed width: Phantom's door screen housing is 1-7/8 in wide by 2-49/64 in deep (48 x 70 mm). A pleated screen's stack grows with the amount of mesh folded into it.

Width of the parked pleat stack by screen width, Streme single pleated door screen (reveal fitted), against Phantom's roll-up door housing
Screen widthPleated stack (Streme)Roll-up housing (Phantom)
Up to 700 mm (27.6 in)93 mm (3.7 in)48 mm (1-7/8 in)
Up to 1,000 mm (39.4 in)105 mm (4.1 in)48 mm
Up to 1,300 mm (51.2 in)115 mm (4.5 in)48 mm
Up to 1,800 mm (70.9 in)125 mm (4.9 in)Single roll-up not made this wide
Up to 2,500 mm (98.4 in)145 mm (5.7 in)Single roll-up not made this wide
Up to 3,000 mm (118.1 in)155 mm (6.1 in)Single roll-up not made this wide
Worked example: a 36 in back door. Parked, a 36 in pleated screen's stack is about 4.1 in (105 mm) against a roll-up housing of 1-7/8 in, so it takes about 2-1/4 in more of a clear opening that is already only 36 in. Now a 70 in slider: a single roll-up does not exist at that width, so the real comparison is two roll-up housings (about 3-3/4 in in total, split across both jambs) against one pleat stack of about 4.9 in on one side. There the gap is about an inch, and the pleated screen is one handle instead of two meeting at a center seal.

Wind, pets and the "pleated is stronger" claim

Some sellers say cords make pleated screens stronger in wind; others say the spring keeps a roll-up taut. Neither claim is backed by a rating: none of the door screen documents read here gives a wind class or speed, and EU classes stop at 3 for insect screens (see wind classes).

What the documents do show is each type's weak point. The patent's tension cords are there to resist "displacement of the screen mesh away from the frame, for example when the screen is pushed by strong wind or pets," which is the pleated failure: mesh pushed out of its guides. Streme ships "windproof clips" and a "windproof slider" only "if your screen is over 1300mm wide," so wider pleated panels need help. On a roll-up, Phantom's magnet latch is built for "breakaway upon impact to protect the mesh": the screen lets go and retracts rather than tearing.

For a windy doorway or a dog that leans on the screen, neither type is the answer. A screen whose mesh edges are held in the side track, which Phantom offers as "fully retained mesh" on its oversized screen, is the step up; how that works is in zip track, keder and zipper edges. On roll-ups you can also choose heavier mesh: Genius offers TuffScreen for the Milano. None of the pleated product sheets we read offers a pet mesh. See screen mesh types.

What wears, and what you adjust

On a roll-up, the parts that tire are the spring and the speed reducer; see retractable screen repair. On a pleated screen, it is the cords. The JELD-WEN ZigZag1 troubleshooting table lists "One of the cords is longer or shorter than the others" and "The cords sag into the opening," both fixed by untying the knot, taking up the slack and re-tensioning evenly. The steps for each maker are in how to adjust the cords on a pleated screen door.

Cost

At one dealer, Metro Screenworks, in October 2026, the Genius Milano 100 single roll-up (up to 60 x 100 in) was on sale at $319.65. Genius pleated screens for wide openings were listed at $1,750.98 for a Sheer Classic 3-panel and an MSRP of $1,799.47 for a ZigZag Two. Compare per opening: for a 70 in slider, price a double roll-up against one pleated panel. Installed price ranges are in retractable screen cost.

Which to choose for your door

A standard 32-36 in single door: roll-up, for the narrow housing, the self-retracting screen and the widest mesh choice. Wheelchair or walker access: pleated, for the flat guide and no spring, as long as the parked stack still leaves 32 in clear; the ADA numbers are checked in is a retractable screen door wheelchair accessible. A slider or opening of 61-96 in: one pleated panel or a double roll-up. A bi-fold or glass wall: pleated, or an oversized roll-up. A dog or a windy doorway: a retained-edge screen. For sliders in particular, including the mounting side and pet doors, see screens for sliding glass doors, and for the roll-up side in more depth, retractable screen doors.

When this comparison stops applying

  • Vertical screens. Motorized screens that drop from a head box over a patio are a different family; see motorized patio screens.
  • Figures are product-specific. Stack widths are Streme's, housing size Phantom's and depths Genius's, Windhager's and Andersen's. Ask your maker for the same numbers.

Bottom line

Choose a roll-up for a standard single door up to 60 in wide: the housing is narrow (1-7/8 in on Phantom's), the spring puts the screen away, and it copes with sloped sills and offers no-see-um and heavier mesh. Choose a pleated screen when it has to stay where you leave it, when the threshold must stay flat (3-4 mm guides), or when one panel has to cross more than 60 in. Before ordering one, check the sill is flat and level and that the jamb can spare about 4 to 6 in for the parked stack.

Frequently asked questions

Do pleated screen doors last longer than roll-up screens?

No document we read gives a cycle life for either type. They wear differently: a roll-up depends on its spring and speed reducer, a pleated screen on cords kept at even, light tension. Genius warns that over-tightening the cords "can damage the cords."

Will a pleated screen work on a sliding door's raised sill?

Only if the bottom guide can sit flat. Genius requires a flat, level surface under the guide, so a stepped or sloped sill has to be made flat first. That is why a roll-up with a threshold adapter is often the simpler fit there.

Sources and standards consulted

  • Energy Efficient Window Attachments (U.S. Department of Energy, Energy Saver)
  • EN 13561:2015, External blinds and awnings (CEN)
  • ASCE 7, Minimum Design Loads for Buildings (wind and snow loads) (American Society of Civil Engineers)

See how we research for our sourcing and verification process.